Wilson DB Pro 62 Amplifier With Adjustable Gain Control

The Wilson DB Pro 62 Amplifier significantly improves cell phone reception inside of a building when installed with the required antennas and RG-6 coax cables (sold separately).  An antenna mounted on the outside of the building receives the signal from the cell tower and transmits it to the amplifier via a coax cable.  The power of the signal is increased, sent through another coax cable to an inside antenna, and then transmitted to your phone.  The Wilson Amplifier System also amplifies the signal going from your phone to the cell tower.  It essentially works as a 2-way hearing aid for your phone.

Typical installations require 4 additional components that are sold separately. 
The specific parts needed will vary based on your building layout, dimensions, etc.  You can purchase components through the links below (advanced) or fill out our questionnaire to receive a customized quote from one of our experts (recommended).

1. Outside Antenna
2. Inside Antenna
3. Coax Cable (Amplifier to Outside Antenna)
4. Coax Cable (Amplifier to Inside Antenna)

Features and Benefits

• Designed for small buildings: homes, offices, apartments, etc.
• Typical (single antenna) installations allow for coverage of approximately 30 feet radius from the inside antenna
• Designed for use with standard RG6 (75 ohm) coax cable (standard TV cable common in many homes).
• Significantly improves voice signal quality, service range, and access
• Improves data communication rates for 2G and 3G technologies
• Greatly reduces dropped calls and noise
• There is no physical connection to the phone so you can walk freely during a call
• Allows multiple cell phones and cellular data cards to be used at the same time
• Extends the life of your cell phone battery - phones vary their power output based on the strength of the signal (the greater the signal, the less power it uses) so a phone being used with an Amplifier will consume less power
• For 800 MHz Cellular and 1900 MHz PCS Bands
• Works on all generations of CDMA, TDMA, GSM, and 3G
• Designed for all US Service Providers except for Nextel
• Overload protection circuit protects cell towers from being overloaded
• Oscillation (or interference) detection and automatic shutdown with auto reset

Specifications

• Dual Band Frequency Range (824-894 MHz / 1850-1990 MHz)
• Gain: 62 dB (1850-1990 MHz) / 62 dB (824-894 MHz)
• Max Output Power 2.5 watts
• Max RF Uplink 34 dBm
• Max RF Downlink 15.7 dBm
• Noise Figure 3.5 dB nominal
• Flatness ±5 dB
• Isolation > 90 dB
• Power Requirements 120-240V AC, 50-60 Hz, 8 W
• Connectors: F-Female
• Dimensions: 6.2 x 4.2 x 1.5 (inches) / 15.7 x 10.7 x 3.8 (cm)
• Weight: 0.64 lbs / 0.29 kg

Included Parts

• 801262 Amplifier
• AC Power Supply
• Installation Guide

Product Documentation

• User Guide - (Includes general installation instructions)