Wilson 4G LTE 700 Amplifier

The Wilson 4G LTE Amplifier With Dual Adjustable Gain Control significantly improves Verizon 4G data signal inside of a building when installed with the required antennas and coax cables (sold separately).  An antenna mounted on the outside of the building receives the signal from the cell tower and transmits it to the amplifier via a coax cable.  The power of the signal is increased, sent through another coax cable to an inside antenna, and then transmitted to your phone.  The Wilson Amplifier System also amplifies the signal going from your phone to the cell tower.  It essentially works as a 2-way hearing aid for your phone.

The Wilson 4G LTE Amplifier With Dual Adjustable Gain Control is a 4G LTE single band indoor booster designed for installation in large buildings. The adjustable gain controls on this booster allow the installer to set separately the uplink gain and downlink gain . This feature allows optimization of the booster's gain to match the requirements of the building in which it is installed.

Typical installations require 4 additional components that are sold separately. 
The specific parts needed will vary based on your building layout, dimensions, etc.  You can purchase components through the links below (advanced) or fill out our questionnaire to receive a customized quote from one of our experts (recommended).

1. Outside Antenna
2. Inside Antenna
3. Coax Cable (Amplifier to Outside Antenna)
4. Coax Cable (Amplifier to Inside Antenna)

Product and Benefits

• Supports all LTE-capable devices operating on the Verizon Wireless 700 MHz LTE network (Band 13)
• Designed for large buildings: warehouses, apartments, high rises, condominiums, homes
• Typical (single antenna) installations allow for coverage of approximately 75 feet radius from the inside antenna
• Adjustable Gain Control - Allows for gain optimization to match specific building requirements and make antenna placement less critical
• Allows multiple cell phones and cellular data cards to be used at the same time
• Extends the life of your cell phone battery - phones vary their power output based on the strength of the signal (the greater the signal, the less power it uses) so a phone being used with an Amplifier will consume less power
• Overload protection circuit protects cell towers from being overloaded
• Oscillation (or interference) detection and automatic shutdown with auto reset

Specifications

• Frequency Range: 776 - 787 MHz (Band 13)
• Gain: 70 dB
• Max Uplink Power 740 mw
• Max Downlink Power 25 dBm
• Noise Figure 3.5 dB nominal
• Isolation: >90 dB
• Flatness ±5 dB
• Power Requirements 110-240 V AC, 50-60 Hz, 10 W
• Connectors: N-Female
• Impedance: 50 ohms
• Dimensions: 5.7 x 4.2 x 1.5 (inches) / 14.0 x 10.8 x 3.9 (cm)
• Weight: 1.27 lbs / 0.544 kg

Included Parts

• 801865 Amplifier
• AC Power Supply
• Installation Guide

Product Documentation

• Installation Guide

Installation

• Wilson Amplifier Systems can be self installed or we can arrange a professional installation for you.  Click here for more details.