APC-4 Cisco Headset Hookswitch Control Adapter

Part # 37978-01
DISCONTINUED

Product Description

APC-4 Cisco Headset Hookswitch Control Adapter
  • Allows you to remotely answer and hang-up calls when using a Plantronics wireless headset system with a Cisco IP Phone
  • Move freely throughout the office and never miss a call for greater productivity
  • Also enables remote ring alert
  • Used as an alternative to the HL-10 Handset Lifter
  • Compatible with most Plantronics wireless headsets including the CS50, CS55, CS70N, CS351N, CS361N
  • Double Y cord: plug 3.5mm end into port under wireless headset charging base, and the modular end into the "phone" port - on opposite Y end plug smoky color modular end into headset port of Cisco phone; plug the other modular end into auxilliary port of Cisco phone
  • HHC software functionality must be enabled though Cisco Unified Communication Manager Administration application
  • Once connected, the HHC will send a ringer alert signal to the headset anytime the phone rings, anywhere within a headset's wireless range
  • Upon hearing the signal, the headset wearer presses the call control talk button on the headset to answer the call remotely
  • To end a call, press the call control button on the headset - the phone will go off and on-hook electronically
  • Also referred to as APC-4
  • Approximately 4 feet long

Compatibility

Various Cisco Unified IP Phone models including 7975G, 7965G, 7945G, 7962G, and 7942G