Product Description
zBoost Xtreme REACH Dual-Band Cell Phone Signal Booster
The zBoost Xtreme REACH provides increased in-building voice and data coverage and superior reach into rural environments using a high-gain directional external antenna which is aimed at the nearest network tower. zBoost Xtreme REACH boosts cell phone signals for voice calls and text for all major carriers. zBoost Xtreme REACH captures the good cellular signal you have outdoors and rebroadcasts it indoors, up to 7,500 square feet, so you can enjoy clearer, faster service without interruption.
Product Features
- High performing dual band signal booster – coverage up to 7,500 sq. ft. (up to 77 dB system gain)
- Ideal for larger residential use with marginal to reliable outside signal
- Reduces dropped and missed calls and can provide faster 3G data performance for multiple simultaneous users
- Boosts performance on iPhone™, Samsung™, Android and other phones and mobile devices
- Automatically operates at maximum gain – no manual adjustments needed
- Extends phone battery life - phone uses less power when the indoor signal is stronger
- Easy to set up - all hardware included
- Designed in Silicon Valley – Made in North America
- Previously known as YX560SL
Package Contents
- Amplifier Base Unit with Base Unit Antenna
- Power Supply
- 50 ft. Coaxial Cable (RG6)
- Directional Signal Antenna
- Mounting Hardware
Replacement / Extension cables
- 20' RG-6 Coax Cable - 950620
- 30' RG-6 Coax Cable - 950630
- 50' RG-6 Coax Cable - 950650
- 75' RG-11 Coax Cable - 951175
- 100' RG-11 Coax Cable - 951100
NOTE: RG-6 cable runs of more than 75 ft, and RG-11 cable runs of more than 120 ft)
Adapters needed for extending cable (Combines two cables with F-Male connectors)
Product Documentation
Specifications
- Frequency: 1850 to 1990 MHz
- System Gain: 77 dB
- PCS Bands Supported
- A, D, B, E, F, C
- Networks
- CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
- Frequency: 824 to 894 MHz
- System Gain: 70 dB
- Cellular Bands Supported: A, B, A’, B’
- Networks: CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
- Power Consumption: 3W standby; 7W max signal - 2.0A Max
- Wall Supply Input; Voltage: 100-240VAC 50-60 Hz; 5.0VDC
- Base Unit Size and Weight: 5” x 7” x 1.25” – 9 oz.
- Indoor Use Only: (40°- 105° F)
- Coverage (Open Areas): Up to 7,500 sq. ft.
FCC Mandatory Registration
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.