Wilson AG Pro Quint Wireless Amplifier

The Wilson AG Pro Quint significantly improves cell phone reception inside of a building when installed with the required antennas and coax cables (sold separately).  An antenna mounted on the outside of the building receives the signal from the cell tower and transmits it to the amplifier via a coax cable.  The power of the signal is increased, sent through another coax cable to an inside antenna, and then transmitted to your phone.  The Wilson Amplifier System also amplifies the signal going from your phone to the cell tower.  It essentially works as a 2-way hearing aid for your phone.

The Wilson AG Pro Quint is a Five band indoor booster for large buildings designed to amplify 4G / 3G / 2G voice and data signal from all major US carriers. The adjustable gain controls on this booster simplify installation by making antenna placement less critical and allows the installer to optimize the amplifier's gain level based on the building's requirements.  The user will benefit from signal boosts on 4G, 3G, 2G for all carriers.

Typical installations require 4 additional components that are sold separately. 
The specific parts needed will vary based on your building layout, dimensions, etc.  You can purchase components through the links below (advanced) or fill out our questionnaire to receive a customized quote from one of our experts (recommended).

1. Outside Antenna
2. Inside Antenna
3. Coax Cable (Amplifier to Outside Antenna)
4. Coax Cable (Amplifier to Inside Antenna)

Product and Benefits

• Designed for large buildings: warehouses, apartments, high rises, condominiums, homes
• Typical (single antenna) installations allow for coverage of approximately 75 feet radius from the inside antenna
• Adjustable Gain (AG) Control - Allows for gain optimization to match specific building requirements and make antenna placement less critical
• Significantly improves voice signal quality, service range, and access
• Improves data communication rates needed for 2G, 3G,  and 4G technologies
• Greatly reduces dropped calls and noise
• There is no physical connection to the phone so you can walk freely during a call
• Allows multiple cell phones and cellular data cards to be used at the same time
• Extends the life of your cell phone battery - phones vary their power output based on the strength of the signal (the greater the signal, the less power it uses) so a phone being used with an Amplifier will consume less power
• For 800 MHz Cellular, 1900 MHz PCS, 1700/2100 MHz AWS ,lower 700 MHz LTE and higher 700 MHz LTE Bands
• Works on all generations of CDMA, GSM, EVDO, LTE, HSPA+ and WCDMA technologies
• Designed for all US Service Providers
• Overload protection circuit protects cell towers from being overloaded
• Oscillation (or interference) detection and automatic shutdown with auto reset

Specifications

• Five Band Frequency Range (698-746 MHz / 776-757 MHz / 824-894 MHz / 1710-2155 MHz / 1850-1990 MHz)
• Gain: 75 dB
• Max Uplink Power 630 mw
• Noise Figure 6-7 dB nominal
• Flatness ±4 dB
• Power Requirements 12V DC
• Connectors: N-Female
• Impedance: 50 ohms
• Dimensions: 8.88 x 6.0 x 1.5 inch (22.5 x 15.2 x 3.8 cm)
• Weight: 2.81 lbs / 0.175 kg

Included Parts

• 803670 Amplifier
• AC Power Supply
• Installation Guide

Product Documentation

• User Guide - (includes general installation instructions)

Installation

• Wilson Amplifier Systems can be self installed or we can arrange a professional installation for you.  Click here for more details.