Product Description
zBoost Dual-Band Signal Booster With Directional Antenna
The zBoost ZB645SL cell phone signal amplifier kit extends a Cell Zone™ inside your larger indoor spaces. The ZB645SL captures the marginal to reliable cellular signal you have outdoors and rebroadcasts it indoors, up to 10,000 square feet. The ZB645SL boosts cell phone signals for voice calls and text for all major carriers.
Product Features
- High performing dual band signal booster – coverage up to 10,000 sq. ft. (up to 84 dB system gain)
- Ideal for large homes that have reliable outside signal or for smaller spaces that have weaker outside signal
- External directional antenna for increased system performance
- Indoor panel antenna for better in-building signal penetration
- Reduces dropped and missed calls and can provide faster 3G data performance for multiple simultaneous users
- Boosts performance on iPhone™, Samsung™, Android™ and other phones and mobile devices
- Automatically operates at maximum gain – no manual adjustments needed
- Extends phone battery life - phone uses less power when the indoor signal is stronger
- Easier to set up – window entry cable included
- Designed in Silicon Valley – Made in North America
- Previously YX645SL
Package Contents
- Amplifier base unit
- Indoor panel antenna
- Power supply
- (2) 15 ft. and (1) 35 ft. of RG6 cable
- Flat window entry cable
- External antenna
- Mounting hardware
Replacement / Extension cables
- 20' RG-6 Coax Cable - 950620
- 30' RG-6 Coax Cable - 950630
- 50' RG-6 Coax Cable - 950650
- 100' RG-11 Coax Cable - YX031‐100
NOTE: RG-6 cable runs of more than 75 ft, and RG-11 cable runs of more than 120 ft)
Adapters needed for extending cable (Combines two cables with F-Male connectors)
Product Documentation
Specifications
- Frequency: 1850 to 1990 MHz
- System Gain: 84 dB
- PCS Bands Supported
- A, D, B, E, F, C
- Networks
- CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
- Frequency: 824 to 894 MHz
- System Gain: 75 dB
- Cellular Bands Supported: A, B, A’, B’
- Networks: CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
- Power Consumption: 3W standby; 7W max signal - 2.0A Max
- Wall Supply Input; Voltage: 100-240VAC 50-60 Hz; 5.0VDC
- Base Unit Size and Weight: 5” x 7” x 1.25” – 9 oz.
- Indoor Use Only: (40°- 105° F)
- Coverage (Open Areas): Up to 10,000 sq. ft.
FCC Mandatory Registration
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.
Compatibility
All cellphones and data cards