zBoost CONNECT Dual-Band Cell Phone Signal Booster

REPLACED BY ZB545
by Zboost
Part # ZB540
DISCONTINUED BY MANUFACTURER
$214.99

Product Description

zBoost CONNECT Dual-Band Cell Phone Signal Booster for your personal workspace

The zBoost CONNECT boosts cell phone signals for voice calls and text for all major carriers.  It captures the reliable cellular signal at an interior window and rebroadcasts it further indoors, so you can enjoy clearer, faster and more reliable service without interruption. And you don’t need roof access or an attic for good performance – just attach the signal antenna to an inside window using the supplied suction cups.

Product Features

  • Dual band signal booster for your personal workspace (up to 60 dB system gain)
  • Ideal for apartments and lofts – no outside antenna placement required
  • Reduces dropped and missed calls and can provide faster 3G data performance for multiple simultaneous users
  • Boosts performance on iPhone™, Samsung™, Android and other phones and mobile devices
  • Automatically operates at maximum gain – no manual adjustments needed
  • Extends phone battery life - phone uses less power when the indoor signal is stronger
  • Easy to set up - all hardware included
  • Designed in Silicon Valley – Made in North America
  • Previously known as YX540 METRO

Package Contents

  • Amplifier Base Unit with Base Unit Antenna
  • Power Supply
  • 50 ft. Coaxial Cable (RG6)
  • Window-mount panel signal antenna with suction cup mounts

Replacement / Extension cables

NOTERG-6 cable runs of more than 75 ft, and RG-11 cable runs of more than 120 ft)

Adapters needed for extending cable (Combines two cables with F-Male connectors)

  • Standard Round Cable Adapter - 25-7200
  • Flat Window Entry Cable - 951129

Product Documentation

 


Specifications

  • Frequency: 1850 to 1990 MHz
  • System Gain: 64 dB
  • PCS Bands Supported
  • A, D, B, E, F, C
  • Networks
  • CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
  • Frequency: 824 to 894 MHz
  • System Gain: 58 dB
  • Cellular Bands Supported: A, B, A’, B’
  • Networks: CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
  • Power Consumption: 3W standby; 7W max signal - 2.0A Max
  • Wall Supply Input: Voltage: 100-240VAC 50-60 Hz; 5.0VDC
  • System Certifications: FCC Parts 15 & 20, Industry Canada
  • Base Unit Size and Weight: 5” x 7” x 1.25” – 9 oz.
  • Indoor Use Only: (40°- 105° F)
  • Desk area - up to 1,500 sq. ft.

FCC Mandatory Registration
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
  • You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
  • You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
  • WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
  • Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.